Specifications

Publication 1794-SG002D-EN-P - May 2012
50 Select FLEX I/O Modules
1794-IF2XOF2I and 1794-IF2XOF2IXT 2 Input/2 Output Isolated
Analog Combination Module
The 1794-IF2XOF2I is a combination module with 2 inputs and 2 outputs with
isolated, individually-configurable channels. Inputs accept signals from a variety
of input sensors (2-, 3-, and 4-wire) in the range of ±10V or ±20 mA. Outputs
produce signals in the range of ±10V or 0…20 mA.
The 1794-IF2XOF2IXT is the extended temperature version of the
1794-IF2XOF2I module.
Dimensions (HxWxD), approx 46 x 94 x 53 mm (1.8 x 3.7 x 2.1 in.)
94 x 94 x 69 mm (3.7 x 3.7 x 2.7 in.) installed
Temperature, operating 1794-IE4XOE2: 0…55 °C (32…131 °F)
1794-IE4XOE2XT: -20…70 °C (-4…185 °F)
(1) Includes offset, gain, non-linearity and repeatability error terms.
ATTENTION: Only connect either a voltage input or a current input per
channel, not both.
2 Input/2 Output Isolated Combination Module
Specification 1794-IF2XOF2I, 1794-IF2XOF2IXT
Calibration Factory calibration
(2)
Input conversion type Sigma Delta
Input conversion rate 2.5/5.0/7.5 ms all channels
Input resolution 16 bit – unipolar
15 bit + sign – bipolar
0.156 mV/cnt – unipolar
0.313 mV/cnt – bipolar
0.320 μA/cnt – unipolar
0.640 μA/cnt – bipolar
Isolation voltage 120V continuous (when used with 1794-TB3, 1794-TB3S,
1794-TB2, 1794-TB3T, or 1794-TB3TS)
250V continuous (when used with 1794-TBN)
Tested at 1500V AC for 60 s and 2550V DC for 1 s, channel
to channel, I/O to system
Data format 16 bits, 2’s complement
2’s complement percent
binary
offset binary
Step response to 63% of FS, input Current or voltage input:
1200 Hz conversion rate = 0.6 ms
600 Hz conversion rate = 6.7 ms
300 Hz conversion rate = 13.4 ms
150 Hz conversion rate = 26.7 ms
4 Input / 2 Output Analog Combination Modules
Specification 1794-IE4XOE2, 1794-IE4XOE2XT