Technical data

A-B SuperBridge Technical Reference
36
F1 Switch to The Home Screen (page 31)
F2 Switch to A-B File Copy Diagnostic Screen (page 37)
F3 Switch to MC Data Screen (page 32)
F4 Switch to port data for the next serial port
F4 Switch to port data for the previous serial port
F6 Switch to the MC with the next controller index
F7 Switch to the MC with the previous controller index
F10 Stop SB and return to the DOS prompt
Numerical Error Values
This is a list of the numerical values that can appear in a communication error field:
Value Name Explanation
2 OvrErr Serial communications Overrun error
4 ParErr Serial communications parity error
8 FrameErrs Serial communications framing error
16 BreakErr Serial communications break condition detected
-1 FormatErr The MC detected an telegram with a bad format
-2 BusyErr The MC can’t perform the service requested in the telegram at this time
-3 AccessErr The MC can’t perform the service requested in the telegram because of
access restrictions
-4 BadataErr The MC can’t perform the service requested in the telegram because
parameter(s) are out of the legal limit
-6 BadFncErr The requested function is unknown by this MC
-5 PowUp The controller has been rebooted and needs comm re-initialization
-7 TimeOuts SB timed out waiting for a MC response
-11 RFrmErr Bad format in MC return telegram
-12 RLimErr Parameter(s) in MC return telegram are out of the legal limit
-13 NotSupErr The MC Model/Version combination is not supported by SB.