Technical data

A-B SuperBridge Technical Reference
35
Line Keyword Explanation
even if the specific version is not supported by SB.
14 ModelIdx A 0 here indicates that there is no support for this application/version
combination.
14 Pacing The controller is in pace mode. See also Bit 6 in MC Status Word,
N12:0,8,16.. (page 14).
15 UnitAddress The local MC controller Number setting in ASCII format. Subtract 48 to
get the Controller Number. See MC Communication Parameters (page
10) and ControllerNumber (page 42)
16 Errors How many recoverable (non-fatal) communication error that have
occurred for this MC since SB was started. Same as “Comm Errors
logged” in MC Data Screen (page 32)
16 LastErr Last communication error encountered on this MC. See Numerical Error
Values (page 36)
16 FatalErrs How many fatal (non-recoverable) communication errors that have
occurred for this port since SB was started.
16 LastFatalErr Last fatal (non-recoverable) communication errors encountered on this
MC. See Numerical Error Values (page 36)
16 DownTime How many ms this MC has waited for revival attempt after a fatal
communication error.
17 RevTime How often (in ms) SB will attempt to re-establish communication with a
MC that has had a fatal (non-recoverable) communication error. See
ReviveTime (page 42)
17 InPuts Hexadecimal representation of the MC physical inputs. See Digital I/O
(page 25)
17 OutPuts Hexadecimal representation of the MC physical outputs. See Digital I/O
(page 25)
17 Alarms Hexadecimal representation of the MC Alarm bits. See General Alarms
(page 24)
17 NumRegs The highest possible register number in this MCs model/version. See
Useful Registers (page 29)
18 SetDlsa Number of attempts to download a setpoint to an MC
18 SetDlsc Number of successful downloads of a setpoint to an MC
18 LastSp Value of the last downloaded setpoint to the MC
18 Leylocked 1 if keyboard/touchpad is locked, else 0
19 DecimalPoints Current values of the five MC decimal point settings.
20 Total Current value of the MC Total. See Total, F14:5,13,21.. (page 19)
20 ProcV Current value of the MC Process Value. See Process Value,
F14:4,12,20.. (page 19)
21 Bezel For a MC², First field is a copy of what is displayed in the upper (seven
segment) display. Second field is a copy of what is displayed in the lower
(alphanumeric) display.
21 YLed Hexadecimal representation of the state of the yellow LEDs in the MC²
front panel.
21 GLed Hexadecimal representation of the state of the green LEDs and square
red light in the MC² front panel.
Function keys: