Specifications

www.kepware.com

Allen-Bradley DH+/DH-485 Device Driver Help

configuration. If you don't want to use interrupts, please select "None"

4. Click OK.

Channel Setup for the Allen Bradley- 1784 KTX/KTX-D card

Before setting the channel properties, you must have the KTX/KTX-D card configured for a unique memory address and

interrupt on the hardware. The selected address and interrupt (if used) should be taken note of, as these parameters

will be used for setting up the channel properties in the server.

Step 1: Configuration

Hardware configuration of the KTX/KTX-D card. Skip this step if already completed, and/or refer to Configuring

Memory and Interrupt on 1784 KTX for more information.

Step 2: Installation

Install the KTX/KTX-D card on an available ISA slot and connect to the appropriate network.

Step 3: Channel Properties Setup for the KTX/KTX-D Card

1. In the server application, right-click on the channel and select Properties.