Specifications

60
www.kepware.com
Allen-Bradley DH+/DH-485 Device Driver Help
Failed to complete loading protocol while performing M16 diagnosis
Error Type:
Fatal
Possible Cause:
One or more binary files related to M16 Diagnosis that came with the driver may have been corrupted.
Solution:
Contact Technical Support.
Failed to load binary resource <ResourceID> for device <Device>
Error Type:
Fatal
Possible Cause:
One of the binary files required for loading the protocol may be corrupted.
Solution:
Contact Technical Support.
Failed to perform M16 Key Write for device <Device Name>
Error Type:
Fatal
Possible Cause:
1. The jumper settings on the KTXD card may be in 8 bit mode.
2. The ISA bus slot may be corrupted
3. The card memory may be corrupted.
Solution:
1. Change it to 16-bit mode. Refer to KTXD user's guide for more information.
2. Try a different ISA slot.
3. Replace the card.
Failed to write to Dual port memory
Error Type:
Fatal
Possible Cause:
1. Network failure.
2. Memory Conflict.
3. The parameters selected for the Channel setup may be incorrect.
4. The parameters selected for the Channel setup may be incorrect.
5. Card is corrupted.
Solution:
1. Check for any broken links between the card and the host. Make sure that the card is inserted properly on the
appropriate slot and then restart the driver.
2. Assign a different memory base address.
3. Change the channel setup parameters with appropriate values.
4. Modify the channel properties with appropriate values.
5. Replace the card.