Manualshelf

Specifications

ManualsBrandsAllen-Bradley ManualsComputer equipment1784-KT/B
51525354555657585960
55
www.kepware.com
Allen-Bradley DH+/DH-485 Device Driver Help
Failed to clear dual port memory while performing functionality test
Failed RAM test for device: <Device Name>
Failed CTC test for device <Device Name>
Failed SIO test for device: <Device Name>
Failed to open binary file <File Name> for device <Device Name>
Failed to enable card for device : <Device Name>
Failed to perform M16 Key write for device, <Device Name>
Failed to load KTXPCL.BIN on device, <Device Name>
Failed to complete diagnosis while performing M16 Diagnosis for device <Device Name>
Failed to complete loading protocol file while performing M16 diagnosis for device <Device name>
Failed to load binary resource <ResourceID> for device <Device Name>
Failed to allocate device for board '<channel>'
Error performing diagnostics test on channel
SST specific error Descriptions
The following error/warning messages may be generated. Click on the link for a description of the message.
Communication
Duplicate Station ID detected by Device <Device Name>
Invalid Station ID detected by device <Device Name>
Error writing to SST ports for device <Device Name>
Failed to take the SST card offline for device <Device Name>
Bad port/memory detected on SST card while loading module on device <Device Name>
Protocol is not reflected onto memory after being loaded on device <Device Name>
SST module could not be loaded because of a card error on device <Device Name>
SST card execution error occurred on device <Device Name>
Failed to allocate device for board '<channel>'
Missing address
Error Type:
Warning
Possible Cause:
A tag address that has been specified dynamically has no length.
Solution:
Re-enter the address in the client application.
Device address '<address>' contains a syntax error
Error Type:
Warning
Possible Cause:
A tag address that has been specified dynamically contains one or more invalid characters.
Solution:
Re-enter the address in the client application.
Address '<address>' is out of range for the specified device or register
Error Type:
Warning