Specifications

www.kepware.com

Allen-Bradley DH+/DH-485 Device Driver Help



PCI Card Instance: We currently support only single instance of the SSTPCI card. Hence, the PCI Card Instance

number for SSTPCI will always be zero.

4. Click OK.

Channel Setup for 1784 PCMK/B card

Before setting the channel properties, you have to have an additional driver installed for the PCMK/B card.

Note: We currently support the PCMK/B card for WindowsXP and Windows2000 only. Before you install the PCMK/B

driver, make sure you have uninstalled any drivers that you may have used previously for this card; then, restart your

computer.

Step 1: Additional Driver Installation

1. After you have installed the card, restart your computer. A Found New Hardware window will pop up and ask you

to configure the newly detected hardware.

2. To continue in the Add/Remove Hardware Wizard, click Next.