Specifications

19
www.kepware.com
Allen-Bradley DH+/DH-485 Device Driver Help
Channel Setup for 5136-SD-PCI card
Caution: Before you install the 5136-SD-PCI driver, make sure you have uninstalled any drivers (i.e. RSLinx or SST)
that you may have used previously for this card and then restart your computer. Failure to do so may result in
unexpected consequences. We strongly recommend you use a fresh PCI slot that has not been used previously with
other DH+ cards. This is not required for Windows NT.
Note: We do not currently support multiple instances of the SSTPCI card. We do not recommend running multiple PCI
cards of similar category (PKTX, PKTXD) while the SSTPCI is running.
Note to Windows NT Users: Windows NT Users must be logged in as an administrator the first time they use the
driver. This is because the driver needs to write some information to the registry before it can start loading the protocol
to the cards.
Example Procedure for removing old driver:
If you have used the PKTX or the SST card before, you may see something like the following picture under Device
Manager.