Specifications

www.kepware.com

Allen-Bradley DH+/DH-485 Device Driver Help

4. Click OK.

Channel Setup for 5136-SD-ISA card

Note: You will not need any additional drivers or additional software from any other vendor. Any additional drivers/

software that may be required will either be supplied or recommended and described in this help file.

Step 1: Configuration

Please configure the I/O port and jumper settings on your SST ISA card. You can refer to Hardware Configuration of

the 5136-SD-ISA (SST) card for more information.

Step 2: Channel Properties Setup

1. In the server application, right-click on the channel. Select Properties.

2. Select the Interface Card tab from the Channel Properties window.