Setup guide

Chapter 2 System Objects
Object Reference Manual 3-82 www.Automationdirect.com
Cannot set PLC to MONITOR mode
The Omron object is trying to set the PLC in MONITOR mode in order to
communicate with the PLC correctly, but cannot perform the operation.
Incorrect address in response
The frame received had an incorrect source address. Check for two or more
devices with the same address.
Incorrect command in response
The frame received had an incorrect command. Check for two or more
devices with the same address.
Incorrect data type in response
The frame received had an incorrect data type marker.
Incorrect frame check sum (FCS)
The frame received had an incorrect check sum.
Omron errors reported in the response
These errors are reported by the Omron device, and are in turn reported to
you in text form.
Omron Models Supported
C20, C200, C500, C1000, C2000, CQM, CPM1