Setup guide

Chapter 3 Driver and Protocol Objects
©
Automationdirect.com 3-39 Object Reference Manual
Note
NOTE: If you are creating a serial Link that will connect through a modem, see the
Modem Setup Guide Appendix C in the LookoutDirect Learning Guide. If you are creating
an Ethernet Link, refer to the DirectSoft Communications Server online help.
After making your choice click on the Next button.
Select the PLC family by single clicking on the appropriate choice. If you
are unsure of the PLC family but know which communications protocol to
use, you can select the “ **Not Sure**” choice. If you are using a PLC
Direct compatible PLC the LinkWizard can try to detect the model
automatically.
Click on the Next> button when you are finished with your selection.