Setup guide

Chapter 3 Driver and Protocol Objects
©
Automationdirect.com 3-23 Object Reference Manual
sdinst.exe
program that ships with the 5136-SD card, using the CHK
option to confirm that the card is working properly.
Unable to access physical memory at segment 0xAAAA
Lookout
Direct
was unable to access the memory at the given segment
address. The memory may already be in use by the operating system or by
another application. Either change the object memory address (which may
involve changing switch settings on the card itself) or, if you are using a
memory manager, make sure that it is excluding the correct portion of
memory.
Unable to open port 0xPPP for SS card
Lookout
Direct
was unable to open the port number specified for the
5136-SD card. Make sure that you have specified the port that is selected
by the jumper settings on the card. Make sure that port and the following
two ports (for example, 250, 251, and 252) are not in use by any other
devices in your computer.
Unexpected data response length
Unexpected response
Unhandled error
You will probably never see one of these alarms. If you do, call National
Instruments and ask for technical support.