Specifications

Allen-Bradley DH+ Driver Help

4. Click OK.

Channel Setup for the Allen Bradley- 1784 KTX/KTX-D Card

The KTX/KTX-D card must be configured for a unique memory address and interrupt on the hardware before the

Channel Properties may be selected. Note the chosen address and interrupt, as these parameters will be used

when setting up the Channel Properties in the server.

Step 1: Configuring the Hardware

For information on hardware configuration, refer to Configuring Memory and Interrupt on 1784 KTX. Users

may skip this step if it is already completed.

Step 2: Installing the KTX/KTX-D Card

Install the KTX/KTX-D card on an available ISA slot and connect to the appropriate network.

Step 3: Setting Up Channel Properties for the KTX/KTX-D Card

1. In the server application, right-click on the channel and then select Properties.

2. Next, select the Interface Card tab in Channel Properties.