Specifications

Allen-Bradley DH+ Driver Help

Modify the requested data type in the client application.

Device address '<address>' is read only

Error Type:

Warning

Possible Cause:

A tag address that has been specified dynamically has a requested access mode that is not compatible with what

the device supports for that address.

Solution:

Change the access mode in the client application.

Array size is out of range for address '<address>'

Error Type:

Warning

Possible Cause:

A tag address that has been specified dynamically is requesting an array size that is too large for the address

type or block size of the driver.

Solution:

Re-enter the address in the client application to specify a smaller value for the array or a different starting point.

Array support is not available for the specified address: '<address>'

Error Type:

Warning

Possible Cause:

A tag address that has been specified dynamically contains an array reference for an address type that doesn't

support arrays.

Solution:

Re-enter the address in the client application to remove the array reference or correct the address type.

Configuration Error Messages

The following error/warning messages may be generated. Click on the link for a description of the message.

Configuration Error Messages

File Corruption

Interrupt not configured

File Corruption

Error Type:

Fatal

Possible Cause:

One or more binary files that came with the driver may have been corrupted.

Solution:

Contact Technical Support.

Interrupt not configured

Error Type:

Fatal

Possible Cause:

1. The interrupt may not be configured on the device.

2. The interrupt configured on the device may not match with the one selected in Channel Setup.