Specifications

Allen-Bradley DH+ Driver Help

SLC500 Slot Configuration

Slot Configuration

SLC500 models (modular I/O racks) must be configured for use with the Allen-Bradley DH+ Driver if the I/O is to

be accessed by the driver. Up to 30 slots can be configured per device.

Using the Slot Configuration Dialog

1. In the Slot/Module list box, left-click on the row to select the slot to configure.

2. Next, left-click on a module from the Available Modules list box in order to select it.

3. Click Add to add the module.

Note: To remove a module, first select the slot in the slot/module list box and then click Remove. The module

selections available are the same as those in the Allen Bradley APS software.

Addressing I/O

Users must know the number of input and output words in each slot. In order to address the I/O in a particular

slot, all slots up to and including that slot must be configured with I/O. For example, if a user is only interested in

the I/O in slot 3, the I/O for slots 1 and 2 must be configured. For more information, refer to Modular I/O

Selection Guide.