Specifications

Allen-Bradley DH+ Driver Help

4. Expand Interrupt Request (IRQ) if it is not already expanded by right-clicking the plus sign. All interrupt

levels being used by other devices should be visible. If the device is using an interrupt, pick a level that is not

already being used by any other device. For example, if the device allows an interrupt level of 3, 5, 7 and 9, and

the list suggests that the levels 3 and 7 are already being used, then users should select either interrupt level 5

or interrupt level 9. Choosing levels 3 and 7 would produce a resource conflict error, which might cause the

device to act erroneously.

Install and Connect KTX(D) to the Network

Installing the KTX(D) Card

For information on installing the KTX(D) card, refer to the instructions below.