Specifications

Allen-Bradley DH+ Driver Help

Step 2: Channel Properties Setup

1. In the server application, right-click on the channel and select Properties.

2. Select the Interface Card tab in Channel Properties.

3. Under the Interface Card tab, complete the following:

l Board Type: Select "5136-SD-PCI" from the drop-down menu.

l Network Type: This driver currently supports only DH+ networks for 5136-SD-PCI cards.

l Station Address: This is the device's unique Node ID: 1-77 octal for DH+. Users must make sure that

this ID doesn't conflict with any other Node ID on the network.

l Baud Rate: The available baud rates are 57.6K, 115K and 230K. Select the baud rate that matches the

device configuration.

l PCI Card Instance: Currently, only a single instance of the SST PCI card is supported. Thus, the PCI

Card Instance number for SST PCI will always be zero.