Specifications

Allen-Bradley DH+ Driver Help

Channel Setup for 5136-SD-PCI Card

Before installing the 5136-SD-PCI driver, make sure that any drivers that have neen used for this card previously

(such as RSLinx or SST) have been uninstalled. Then, restart the computer.

Caution: Failure to do so may result in unexpected consequences. A fresh PCI slot that has not been used with

other DH+ cards before is recommended. This is not required for Windows NT.

Note: Multiple instances of the SST PCI card are not currently supported. It is not recommended that users run

multiple PCI cards of similar category (such as PKTX and PKTXD) while the SST PCI is running.

Windows NT Users Note: Windows NT users must be logged in as an administrator the first time that the

driver is used. This is because the driver must write some information to the registry before it can start loading

the protocol to the cards.

Removing Old Drivers: Example Procedure

Users familliar with the PKTX or the SST card may have seen something like the following image under Device

Manager before.