Specifications

Publication 1738-IN006B-EN-E - July 2004
2 ArmorPoint AC Input Modules, Series A
Important User Information
Solid state equipment has operational characteristics differing from those of electromechanical equipment.
Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication
SGI-1.1 available from your local Rockwell Automation sales office or online at
http://www.ab.com/manuals/gi) describes some impo rtant differences between solid state equipment
and hard-wired elect ro m echanical devices. Because of this difference, and also because of the wide
variety of uses for solid state equi pment, all persons responsibl e for applying this equipme nt must satisfy
themselves that each intended application of this equipment is acceptable.
In no event will Rockwell Auto mation, Inc. be respo nsible or liable for indirect or conseque ntial damages
resulting from the use or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the
many variables and requirements associated with any particular installation, Rockwell Automation, Inc.
cannot assume responsibility or liability for actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits,
equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell
Automation, In c. is prohibit ed.
Throughout this manu al we use no tes to make you aware of safety considerations.
WARNING
Identifies information about practices or circumstances that can cause an explosion in a
hazardous environ m en t, which may lead to personal injury or death, proper ty damage,
or economic loss.
IMPORTANT
Identifies information that is critical for successful application and understanding of the
product.
ATTENTION
Identifies information about practices or circumstances that can lead to personal injury or
death, property damage, or economic loss. Attentions help you:
• identify a hazard
• avoid a hazard
• recognize the co nse quence
SHOCK HAZARD
Labels may be located on or inside the equipment to alert people that dangerous voltage
may be present.
BURN HAZARD
Labels may be located on or inside the equi pment to alert people that surfaces may be
dangerous temperatures.