Specifications

In addition to the standard equipment shipped
with the 1770-T1, -T2, -T3, andT4 systems,
optional equipment can be ordered. These
system
options include:
• Keyboard Storage Case (Cat. No. 1770-XC)
• Industrial Terminal Adapter Cable (Cat. No.
1770-CB,
-CC)
• Alphanumeric/ Graphics Keytop Overlay
(Cat. No. 1770-KAB)
• PLC-3 Graphics Keytop Overlay (Cat. No.
1770-KDB)
1.3 COMPATIBILITY
Page 1-3
1770-805
The compatibility chart in Table 1-3 sum-
marizes which Industrial Terminal Systems
can be used with which Processors. For
example, the 1770-T1, -T2, and T3 Industrial
Terminal Systems can be used with all PLC-2
Family Processors. The 1770-T3 Industrial
Terminal System, however, is the only one
that can fully support the PLC-2/20 (LP2),
PLC-2/30 and Mini-PLC-2/15 Processors.
Therefore, programs entered on these Pro-
cessors using a 1770- T3 Industrial Terminal
System must not be edited using either 1770-
T1 or -T2 Industrial Terminal Systems. The
limitations footnoted in Table 1-3 are described
in the corresponding programming manuals
the Processors.
TABLE 1-3- Industrial Terminal/Processor Compatibility
Industrial Terminal
PLC
PLC-2 Mini-PLC-2 PLC-2/20 PLC-2-20 Mini-PLC-2/15
PLC-2/30
Series 7100
System (Cat. No.) (LB) (LN1 ,LN2,LN3) (LP1) (LP2)
(LV) (LP3)
PLC-3
CNC
1770-T1 X X X X
D
X
D
X
D
X
1770-T2
X
X
X X X
D
X
D
X
D
X
1770-T3
XI:J
X X X
X
X
X
X
1770-T4 X
D Processor capabilities will be limited when using this Industrial Terminal.
1:1
1770-T3 series B or later systems are compatible with PLC Programmable Controllers. Earlier 1770-T3 systems are not
compatible with PLC Programmable Controllers.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com