Specifications

Page 1-1
1770-805
Section 1
INTRODUCTION
1.0 SCOPE OF MANUAL
The Industrial Terminal System User's Manual
describes the installation, operation, and
general capabilities of the Industrial Terminal
System (Cat. No.1770-T1, -T2, -T3, -T4). The
manual does not describe certain processor
dependent characteristics, including peri-
pheral device operation and programming
information such as the instruction set and
report generation capability. This information
is contained in the appropriate Processor
documentation. Table 1-1 provides a cross
reference
to other Allen-Bradley publications
which discuss these topics in relation to speci-
fic Allen-Bradley processors.
1.1 GENERAL
The Industrial Terminal System is a portable
and versatile programming terminal that has a
Cathode Ray Tube (CRT) and a keyboard.
When
connected to an Allen-Bradley Pro-
cessor,
it is used to enter, monitor, and edit
ladder diagram programs and report genera-
tion messages. It can also be connected to a
line printer, a Digital Cassette Recorder, or a
Data
Cartridge Recorder to perform various
peripheral functions. The Industrial Terminal
System
can also be connected to a modem,
computer or other RS-232-C device for use as
a data
terminal. The ladder diagram instruc-
tions and alphanumeric/ graphic characters
that are generated or received are clearly
displayed on the CRT screen.
1.2 DESCRIPTION
There are four Industrial Terminal Systems
(Cat. No. 1770-T1,T2, -T3, and -T4) available.
Each has the same types of equipment. These
items include:
~ Industrial Terminal CRT Monitor (Cat. No.
1770-TA, Series B)
TABLE 1-1- Supporting Documentation
Processor
Publication Title
Publication Programming
Related Peripheral
Number
Information
Operating Information
PLC-3
PLC-3 Programmable Controller
Installation and Operations Manual
1775-800
X
PLC-3
PLC-3 Programmable Controller
Programming Manual
1775-801
X
PLC-2/30
PLC-2/30 Programmable Controller
Programming and Operations Manual
1772-806 X X
PLC-2/20
PLC-2/20 Programmable Controller
(LP2 or LP1)
Programming and Operations Manual
1772-802
X X
Mini-PLC-2/15
MINI-PLC-2/15 Programmable Controller
Programming and Operations Manual
1772-804 X X
Mini-PLC-2
Mini-PLC-2 Programmable Controller
Programming and Operations Manual 1772-821
X X
PLC-2 PLC-2 User's Manual 1772-800
X
X
PLC D
PLC Programmable Controller
Programming and Operations
1774-800 X
PLC 0
PLC Programmable Controller Program
Panel Interface Module Operating
Instructions
1774-817 X
Series 7100 Programmable Interface User's Guide
7100-4.2 X X
D Only 1770-T2 and 1770-T3, series 8 or later Industrial Terminal Systems can be used with a PLC Programmable controller. They are used in
the same manner as the PLC Program Panel, except that a blank blue key is used instead of a SELECT key.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com