Specifications

Page 6-6
1770-805
Industrial Terminal System that use (CTRL][P]
as part of the key sequence (Table 6-3). These
control codes are used for cursor positioning
and controlling other operating characteristics.
For example, [CTRL] [P] [5] [G] is used to
enable the graphics capabaility. Keys that
contain alpha characters will now generate
graphic characters.
Alpha characters received
through Channel 8 will be displayed as their
graphic equivalents.
FIGURE 6-3- Graphics Example
TABLE 6-3- Industrial Terminal Control Codes
CONTROL
CODE KEY
FUNCTION
SEQUENCE
[CTRL][P] Positions the cursor at the specified
[Column#][;] column and line number. [CTRL][P]
[Line #][A] [A]will position the cursor at the top
left corner of the screen.
[CTRL][P][F]
Moves the cursor one space to the
right
[CTRL][P][U]
Moves the cursor one line up in the
same
column.
[CTRL][P][5][C]
Turns cursor ON.
[CTRL][P][4][C]
Turns cursor OFF.
[CTRL][P][5][G]
Turns ON graphics capability.
[CTRL][P][4][G]
Turns OFF graphics capability.
[CTRL] [P] [5] [P]
Turn Channel CON.
[CTRL][P][4][P]
Turns Channel C OFF.
KEY SEQUENCE
ATTRIBUTED
[CTRL][P][OJ[T]
Attribute 0 = Normal Intensity
[CTRL][P][1 ][T]
Attribute 1 =Underline
[CTRL][P][2][T]
Attribute 2 =Intensity
[CTRL][P][3][T]
Attribute 3 =Blinking
[CTRL][P][ 4 ][T]
Attribute 4 = Reverse Video
D Any three attributes can be used at one time using the following
key sequence:[CRTL][P][Attribute #][;][Attribute #][T].
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com