Specifications

Page 4-7
1770-805
Cat. No. 1 778-CR,
Belden 8723 or Equivalent
\
Cat. No. 1778-CR,
Belden 8723 or
Equivalent To Channel B
10064
FIGURE 4-10- Cable Diagram for RS-232-C
0
0
PLC Processor
@ @
@
@
@ @
© §
1774-DH2
Data Handling
0
IJ/Module, Series
/1 8 or Later
( • ALLEN-BRADLEY c=J )
0
10 Feet
Data
Handling Interconnect Cable
(Cat. No. 1774-DC2)
Industrial
Terminal
Channel 8
Industrial Terminal/ Data Handling
Adapter Cable
(Cat. No. 1770-CB)
10065
L---------------------·~·-·-------------------.....1
FIGURE 4-11 -Data Handling Connection Diagram (13 feet)
cable is constructed as shown in Figure 4-13
using two male connectors. The parts needed
to construct the cable are listed in Table 4-1.
4.5.3 Connecting a PLC-3 Processor for
Report Generation
The Industrial Terminal System can be used in
Alphanumeric mode for report generation
with the PLC-3 Processor. They can be con-
nected locally (15 cable-feet) or up to 5000
cable-feet apart.
The PLC-3
Processor is connected locally to
the Industrial Terminal System for report
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com