Specifications

Publication GMC-SG001E-EN-P — June 2001
8-28 Motion Control Accessories
Ultra Family Motor Shaft Seal Kits
The following section contains 2098 Ultra Family motor shaft seal kit combinations, dimensions and
catalog number.
Motor Shaft Seal Kit Combinations and Dimensions
Note: Lubricant is provided with each shaft seal kit to reduce wear.
Note: Shaft seals are made of nitrile.
Note: Shaft seal kits are not available for Y-Series motors.
2098 Ultra Family Motor Shaft Seal Kit Catalog Number
Catalog numbers consist of various characters, each of which identifies a specific version or option for that
component. Use the catalog numbering chart below to understand the configuration of your motor shaft
seal kit. For questions regarding product availability, contact your Allen-Bradley distributor.
Motor Series Catalog Number Inside Diameter mm (in.) Outside Diameter mm (in.) Width mm (in.)
F-4000 0041-5060 22.225 (0.875) 36.4998 (1.437) 6.35 (0.25)
F-6000 0041-5061 36.525 (1.438) 53.975 (2.125) 7.874 (0.31)
H-2000 0041-5056 12 (0.47) 22 (0.87) 7 (0.27)
H-3000 0041-5065 15 (0.58) 35 (1.4) 7 (0.27)
H-4000 0041-5058 20 (0.79) 47 (1.85) 7 (0.27)
H-6000 0041-5059 38 (1.5) 80 (3.15) 8 (0.31)
H-8000 0041-5053-005 45 (1.77) 85 (3.35) 8 (0.31)
MPL-A300 MPL-SSN-A3B3 17 (0.67) 47 (1.85) 7 (0.28)
MPL-A400 MPL-SSN-A4B4 20 (0.79) 52 (2.05) 7 (0.28)
MPL-A500 MPL-SSN-A5B5 25 (0.985) 62 (2.44) 7 (0.28)
N-2300 0041-5056 6.35 (0.25) 22.225 (0.875) 3.175 (0.125)
N-3400 0041-5065 12.7 (0.5)
28.575 (1.125)
6.35 (0.25)
N-4200 0041-5058 15.875 (0.625)
N-5600 0041-5059 19.05 (0.75) 34.925 (1.375)
0041- xxxx
Motor Series: 2000, 2300, 3000, 3400, 4000, 4200, 5600, 6000, 8000
Bulletin Number