Specifications

Publication GMC-SG001E-EN-P — June 2001
Motors 6-75
1326AS Series Motors
The 1326AS Series rare earth servo motors feature
neodymium-iron-boron permanent magnet rotors that provide low
inertias, high accelerations and high peak torques. These compact,
environmentally-rugged, brushless, 460V servo motors are intended to
be used with the Allen-Bradley 1394 Motion Control System.
Each 1326AS Series servo motor features:
•
An economical, compact design that can function in harsh environments.
•
Neodymium-iron-boron magnet rotors that provide a high torque-to-inertia rating for faster light
machinery acceleration.
•
A three-phase, sinusoidally wound stator field for smooth operation at slow speeds.
•
TENV construction.
•
IP65 environmental rating.
•
An extruded aluminum housing for improved heat transfer.
•
UL Listed.
•
A CEI/IEC 72-1: 1991 metric flange mount with metric shafts.
•
A normally closed thermal switch in the motor winding (maximum current rating of 2.5A at 250V AC)
for thermal overload indication.
•
A rugged, 2-pole brushless resolver that provides accurate position feedback, eliminates the need for
on-board electronics and can withstand harsh shock, high operating temperatures and vibration.
Resolver feedback generates 1024 ppr (4096 counts/rev) A Quad B encoder output.
•
IP65-rated, quick release (bayonet release) connectors for easy installation and maintenance.
•
The ability to be vertically mounted at any angle with the shaft up or down.
•
Precision balance of 0.0127 mm (0.0005 in.) total peak-to-peak displacement.
Note: For drive compatibility, refer to the Motor Selection Chart in Preface.