Specifications

Publication GMC-SG001E-EN-P — June 2001
Motors 6-43
MP-Series Motor Catalog Number
Note: Catalog numbers consist of various characters, each of which identifies a specific version or option
for that component. Use the catalog numbering table chart below to understand the configuration of
your motor. For questions regarding product availability, contact your Allen-Bradley distributor.
MP L - x xx 10 x - x x x x A A
Factories Options
A = STANDARD
Mounting Flange
A = IEC Metric
Brake
2 = No Brake
4 = 24V DC Brake
Connectors
2 = Circular Connector, Facing Shaft (Standard)
3 = Circular Connector, Facing Rear
Enclosure/Shaft Key/Shaft Seal
J = IP65 Housing/Shaft Key/No Shaft Seal
K = IP65 Housing/No Shaft Key/No Shaft Seal
Feedback
H = 2000-Line Encoder
M = Multi-turn High Resolution Encoder
R = 2-Pole Resolver
S = Single-turn High Resolution Encoder
Rated Speed
D = 2000 rpm
E = 2500 rpm
F = 3000 rpm
G = 3250 rpm
H = 3500 rpm
J = 3750 rpm
K = 4000 rpm
L = 4250 rpm
Magnet Stack Length
10 = 0.0394 mm (1 in.)
20 = 0.0788 mm (2 in.)
30 = 0.1182 mm (3 in.)
Frame Size
3 = 100 mm (3.94 in.)
4 = 115 mm (4.531 in.)
45 = 130 mm (5.122 in.)
5 = 165 mm (6.501 in.)
6 = 215 mm (8.471 in.)
8 = 265 mm (10.441 in.)
9 = 300 mm (11.82 in.)
Voltage Rating
A = 230V AC
B = 460V AC
Series Type
L = Low Inertia
Bulletin Number
M = 4500 rpm
N = 4750 rpm
P = 5000 rpm
Q = 5250 rpm
R = 5500 rpm
S = 5750 rpm
T = 6000 rpm
* The maximum speed with the 5000-Line encoder is 2400 RPM
because of the frequency output limit of the encoder.
Note: Options are not available in all sizes.
Note: Optional configurations or encoder line counts have extended
lead times and additional charges.