Installation manual

System Start-Up
Chapter 4
42
B
FUSE
PULL
Fuse cover
7. Pull the table labeled Fuse Pull to the left.
8. Remove the fuse.
9. Use needle-noise pliers, grip the electrical card firmly and remove it from
J19.
C
FUSE
PULL
FUSE PULL tab
D
FUSE
PULL
Electrical card
10. Re-insert the electrical card with the label “220V” side showing.
11. Push the tab labeled FUSE PULL to the right.
12. Insert the same fuse.
13. Slide the fuse cover to the right.