User manual

49 Publication 1734-UM015A-EN-E - November 2009
Chapter 6
Configuring POINT I/O and ArmorPOINT I/O
DeviceLogix modules using RSNetworx for
DeviceNet
About This Chapter
In this chapter, you will learn how to do the following:
• Configure the module using the Configuration tab
• Use the data on the Parameters tab
• Configure peer communication
• Produce data without using a master
• Start the DeviceLogix Function Block Editor on the DeviceLogix tab
Configure the Module using
the Configuration tab
The following diagram shows the Configuration tab of a POINT I/O
DeviceLogix module in RSNetWorx for DeviceNet. The Configuration tab of
an ArmorPOINT I/O DeviceLogix module looks similar.