User manual

1 Publication CIG-WD001B-EN-P - May 2005
Chapter 18
1792D ArmorBlock MaXum I/O Blocks
Input M icro- Conn ector
(View into Socket)
Pin 1 Sensor Source voltage
Pin 2 Input B
Pin 3 Return Logic Ground
1
Pin 4 Input A
Pin 5 Not Used
Output Micr o-C onnect or
(View into Socket)
Pin 1 Not Used
Pin 2 Output B
Pin 3 Auxiliary Power Ground
Pin 4 Output A
Pin 5 Not Used
1
Logic Ground is approximately 0.4V above DeviceNet V- measured at the module.
Input Micro-Connector
(view into socket)
Pin 1 Sensor Source voltage
Pin 2 Input B
Pin 3 Return Logic Ground
1
Pin 4 Input A
Pin 5 Physical Earth
Output Micro-Connector
(view into socket)
Pin 1 Not Used
Pin 2 Output B
Pin 3 Auxiliary Power Ground
Pin 4 Output A
Pin 5 Physical Earth
1
Logic Ground is approximately 0.4V above DeviceNet V- measured at the module.
1792D-12BVT4D1792D-12BT4PE
(View into Socket)
Pin 1 Sensor Source Voltage A
Pin 2 Input B
Pin 3 Return Logic Ground
1
Pin 4 Input A
Pin 5 Sensor Source Voltage B
1
Logic Ground is approximately 0.4V above DeviceNet V-measured at the module.
Input Micro Connector
1792D-16BVTOCD
(View into Socket)
Pin 1 Sensor Source Voltage
Pin 2 Input B
Pin 3 Return Logic Ground
1
Pin 4 Input A
Pin 5 Not Used
1Logic Ground is approximately 0.4V above DeviceNet V-measured at the module.
Input Micro Connector
1792D-16BVT0D