User manual

Publication 1768-UM001C-EN-P - November 2007
96 Develop Motion Applications
5. Click the Drive/Motor tab.
a. From the Amplifier Catalog Number pull-down menu, choose the
catalog number of your drive.
b. Click Change Catalog to select your motor's catalog number.
c. In the Drive Resolution box, type the number of feedback counts.
You can collect data as the motor turns:
• a revolution.
• a millimeter.
• an inch.
d. From the Drive Counts per pull-down menu, choose one of these
feedback count options:
• Motor Rev - the default setting
• Motor Inch
• Motor Millimeter
6. Click the Conversion tab.
IMPORTANT
The default, and only, setting for Loop Configuration
is Position Servo.