User manual

9 Publication 1768-UM001C-EN-P - November 2007
Preface
Purpose of This Manual
This manual describes the necessary tasks to install, configure, program, and
operate a CompactLogix system.
Who Should Use This
Publication
This manual is for automation engineers and control system developers who
design, program, and commission 1768 CompactLogix control systems.
Additional Resources
These documents address Logix5000 controllers.
You can view or download publications at
http://literature.rockwellautomation.com
. To obtain paper copies of technical
documentation, contact your Rockwell Automation distributor or sales
representative.
Resource Description
1768-L43 and 1768-L45 CompactLogix Controller Installation Instructions,
publication 1768-IN004
Details how to assemble and install the
controllers and provides technical specifications.
CompactLogix L43 and L45 Controller Version 17 Firmware Release Note,
publication 1768-RN016
Provides revision, restriction, and anomaly
information for this controller.
Logix5000 Controllers Execution Time and Memory Use Reference Manual,
publication 1756-RM087
Details how to estimate the execution time and
memory use of the controller’s logic.
PhaseManager User Manual, publication LOGIX-UM001
Details how to use equipment phases, set up
state models for equipment, and program in a
way that resembles S88 and PackML models.
Logix5000 Controllers Quick Start, publication 1756-QS001
Details how to begin programming and
maintaining Logix5000 controllers.
Logix5000 Controllers Common Procedures Programming Manual,
publication 1756-PM001
Provides guidance on the development of
controller projects.
Logix5000 Controllers System Quick Reference, publication 1756-QR107
Provides general information on Logix5000
controllers.
Logix5000 Controllers General Instruction Set Reference Manual,
publication 1756-RM003
Details how to program the controller for
sequential applications.
Logix5000 Controllers Process Control/Drives Instruction Set Reference Manual,
publication 1756-RM006
Details how to program the controller for process
or drives applications.
Logix5000 Controllers Motion Instructions Reference Manual,
publication 1756-RM007
Details how to program the controllers for motion
applications.
EtherNet/IP Communication Modules in Logix5000 Control Systems User Manual,
publication ENET-UM001
Details how to configure and use the modules.
ControlNet Communication Modules in Logix5000 Control Systems User Manual,
publication CNET-UM001
Details how to configure and use the modules and
provides technical specifications.