User manual

Publication 1768-UM001C-EN-P - November 2007
88 Develop Motion Applications
The New Module dialog appears.
5. In the Name box, type the module name.
6. In the Slot box, type the slot the new module will occupy.
7. Leave Open Module Properties unchecked.
8. Click OK.
Add SERCOS Interface
Modules
With the addition of SERCOS interface modules to a controller’s I/O
configuration, you can use RSLogix 5000 programming software to set up the
modules.
To add SERCOS interface modules, perform this procedure.
1. In the I/O configuration tree in RSLogix 5000 programming software,
right-click your module and choose New Module.