User manual

Publication 1768-UM001C-EN-P - November 2007
64 Configure and Monitor I/O
If the module faults but maintains an open connection to the controller,
the controller tags database displays the fault value 16#0E01_0001.
Display Fault Data via Module Properties Dialog
To display fault data via another another option in RSLogix 5000
programming software, perform this procedure.
1. Right-click your 1769 I/O module and choose Module Properties.
The Module Properties dialog appears.
2. Click the Connection tab.
3. From the Module Fault pull-down menu, view any faults affecting your
1769 I/O module.
23 15
7
27 19 11
3
}
31
23 15
70
27 19 11
3
}
31
FaultCode
Fault_Code_Value
FaultInfo
Reserved
Reserved
Connection_Closed
Fault_Bit
0 = Connection Open
1 = Connection Closed
Fault Word Bits
Bit Description
Fault_Bit This bit indicates that at least one bit in the fault word is set (1). If
all of the bits in the fault word are cleared (0), this bit is cleared (0).
Connection_Closed This bit indicates whether the connection to the module is open (0)
or closed (1). If the connection is closed (1), the Fault_Bit it set (1).