User manual

Publication 1768-UM001C-EN-P - November 2007
Configure and Monitor I/O 63
Monitor I/O Modules
To monitor I/O modules, you can:
• use RSLogix 5000 programming software to display fault data.
• program logic to monitor fault data so you can take appropriate action.
Display Fault Data
Fault data for certain types of module faults can be viewed through the
programming software.
To display fault data, perform this procedure.
1. In RSLogix 5000 programming software, right-click Controller Tags in
the Controller Organizer and choose Monitor Tags.
The Monitor Tags display appears.
The default display setting for the fault data is decimal.
2. Change the display setting for the fault data to Hex to read the fault
code.