User manual

Publication 1768-UM001C-EN-P - November 2007
Communicate over Networks 31
1732 ArmorBlock I/O ArmorBlock I/O contains a built-in
adapter in the base block
• 8 points
• 8 in, 8 out, or 8 self-configuring
• front or side mount
• M12 or M8 I/O connector
1792 ArmorBlock MaXum I/O ArmorBlock MaXum I/O contains a
built-in adapter in the base block
• maximum value IP67 I/O
• lowest overall installed cost on KwikLink
• point-level diagnostics
• 4...16 points
• DeviceLogix-enabled
• input-only, output-only, or combos
Distributed Modular I/O
1734 POINT I/O 1734D POINTBlock I/O
1734-ADN
1734-ADNX (with subnet connectivity)
1734-PDN (DeviceNet power supply)
• highly granular (2, 4, or 8 points)
• digital, analog, relay outputs, isolated temperature, RTD
thermocouple, counter, and ASCII modules
• channel-level Logix diagnostics: wire off, short circuit, OR,
UR, CALIB, fault, and more
• removal and insertion under power (RIUP)
• expansion power supply and a POINT Power Bus Isolation
Module available
• removable terminal blocks
• a total of 63 POINT I/O modules can be assembled on a
single DeviceNet node
• 1734-ADNX increases the reach of DeviceNet from 500 to
1500 meters
• 1734-ADNX allows an expansion power supply for
additional Pinatubo backplane current
• up to 504 points maximum using 8-point digital I/O modules
1738 ArmorPoint I/O 1738-ADN12
1738-ADN18
1738-ADN18P
1738-ADNX
• DIN rail mounting
• 1P67 and NEMA 4 rated
• highly granular (mix and match to your exact needs)
• removal and insertion under power (RIUP)
• full range of digital, analog, specialty, and temperature
modules
• up to 252 points per adapter
Catalog Number Adapter Specifications