User manual

Publication 1768-UM001C-EN-P - November 2007
24 Communicate over Networks
3. Select one of the requests and click Add to Relation List.
The New Entry dialog appears, showing the Ethernet address (MAC).
4. In the IP Address box, type the IP address and click OK.
1768-ENBT EtherNet/IP Communication Module
The 1768-ENBT EtherNet/IP communication module:
• supports messaging, produced/consumed tags, HMI, and
distributed I/O.
• encapsulates messages within standard TCP/UDP/IP protocol.
• shares a common application layer with ControlNet and DeviceNet
networks.
• connects via RJ45 connector.
• supports half-/full-duplex 10 MB or 100 MB operation.
• supports standard switches.
In this example:
• the controllers produce and consume tags.
• the controllers initiate MSG instructions that send and receive data or
configure devices.
• the personal computer uploads or downloads projects to the controllers.
• the personal computer configures devices on an EtherNet/IP network.
• the controllers establish I/O and drive control over an EtherNet/IP
network.