User manual

Publication 1768-UM001C-EN-P - November 2007
Directly Connect to a Controller Via the Serial Port 19
Select the Controller Path
To select the controller path, perform this procedure.
1. In RSLogix 5000 programming software, open a project for the
controller.
2. From the Communications menu, choose Who Active.
3. Expand the communication driver to the level of the controller.
4. Select the controller.
IMPORTANT
Remember to update your controller’s firmware prior to
establishing communication and downloading a program.
To Click
Monitor the project in the controller Go Online
Transfer a copy of the project from the controller to
RSLogix 5000 programming software
Upload
Transfer the open project to the controller Download