User manual

Publication 1768-UM001C-EN-P - November 2007
Directly Connect to a Controller Via the Serial Port 17
Configure the Serial Driver
Use RSLinx software to configure the RS-232 DF1 device driver for serial
communication. To configure the driver, perform this procedure.
1. In RSLinx software, from the Communications menu, choose Configure
Drivers.
The Configure Drivers dialog appears.
2. From the Available Driver Types pull-down menu, choose RS-232 DF1
devices.
3. Click Add New to add the driver.
The Add New RSLinx Driver dialog appears.
4. Specify the driver name and click OK.