User manual

Bulletin 193-ED, 193-EE
Motor Protection
1-69
Visit our website: www.ab.com/catalogs
Rockwell Automation
POWER
Description For Use With Cat. No.
Core Balanced Ground
Fault Sensor
 Required when using
either an E1 Plus
Ground Fault Protection
or Ground Fault/Jam
Module
 Required for ground
fault protection with the
Cat. No. 193-EC3
overload relay
20 mm (0.79 in.) 100-C09…100-C37
193-CBCT1
40 mm (1.57 in.) 100-C09…100-C97
193-CBCT2
63 mm (2.5 in.)
100-C09…100-C97,
100-D115…100-
D180
193-CBCT3
82 mm (3.25 in.)
100-C09…100-C97,
100-D115…100-
D420
193-CBCT4
DeviceNet Configuration Terminal
Used to interface with objects on a DeviceNet
network. Includes 1 m communications cable (193-
CB1).
DeviceNet
193-DNCT
1 meter communication cable, color-coded bare
leads
193-DNCT
193-CB1
1 meter communication cable, microconnector
(male)
193-CM1
Panel Mount Adapter/Door Mount Bezel Kit
193-DNCT-BZ1
Remote Reset Solenoid
24V AC, 50/60 Hz
E1 Plus (Series C
and later)
193-EMRJ
110/120V AC, 50/60 Hz
193-EMRD
220/240V AC, 50/60 Hz
193-EMRA
24V DC
193-EMRZ24
48V DC
193-EMRZ48
115V DC
193-EMRZ01
Accessories for Overload Relays, Continued
Accessories
Description For Use With Cat. No.
Terminal Lugs
 Set of two
 Protection class IP2X per IEC 60529
and DIN 40 050
100-D115, 100-D140, 100-D180,
100-D115E…D180E, 193-EC_F,
193-EE_F
100-DTB180
100-D210...100-D420, 193-
EC_G, 193-EF2C, 193-EE_G
100-DTB420
Terminal Covers
 Protection class IP20 per IEC 60529
and DIN 40 050
 For direct-on-line, reversing, two-
speed, and wye-delta/star-delta
assemblies
100-D115…100-D180, 193-
EC_F, 193-EE_F
100-DTC180
100-D210...100-D420, 193-
EC_G, 193-EE_G
100-DTC420
100-D630…100-D860, 193-
EC_H, 193-EE_H
100-DTC860
100-D630…100-D860, 193-
EC_H, 193-EE_H
100-DTCS860
Terminal Lugs (UL/CSA), Copper Frame
Set of three
100-D115, 100-D140, 100-D180,
193-EC_F, 193-EE_F
100-DL180
100-D210…100-D420, 193-
EC_G, 193-EE_G
100-DL420
100-D630, 100-D860, 193-
EC_H, 193-EE_H
100-DL630
100-D630, 100-D860, 193-
EC_H, 193-EE_H
100-DL860
Note: For labeling materials, see page 1-37.