User manual

Bulletin 141A
Mounting System
1-59
Visit our website: www.ab.com/catalogs
Rockwell Automation
POWER
Busbar Components, continued
Product Selection
Description Busbar [mm] PQ Cat. No.
Terminal Cover
Finger protection when busbars supplied with single
terminals. Attaches directly to busbars.
Height: 180 mm, Width: 54 mm
12…30 x 5
or
12…30 x 10
1
141A-BK1
Terminal Cover
Finger protection when bus bars are supplied by
Cat. No. 141A-VU3300_ supply module
Attaches directly to bus bars
Height: 200 mm
Depth: 90 mm
180 x 200 x 90
1
141A-BK180
228 x 200 x 90
141A-BK228
250 x 200 x 90
141A-BK250
Components for Terminal / Busbar Covers of individual length
Set of Busbar Shroud Holders 1 left, 1 right side
1
141A-BKH
Busbar Shroud Profile 1 x 1.1 m
141A-BKC
Top / Bottom Busbar Shroud Profile 2 x 1.1 m
141A-BKS
Busbar Connector
System distance: 5…10 mm
12…20 x 5/10 12
141A-VC3A
System distance: 13…20 mm 20…30 x 5/10 6
141A-VC3B
Busbar Shroud Cover
200 x 1100 mm
Covers all three busbars
12…30 x 5 or
12…30 x 10
2
141A-BCF1
Busbar Shroud Holder
Two required per section of Busbar Shroud Cover
12…30 x 5 or
12…30 x 10
10
141A-BCF1H
Double-T Busbar Connectors
For connection of double-T busbar racks with same
dimensions, Width: 95 mm
Double-T 3
141A-VC5F
Double-T Busbar Connectors
For connection of double-T busbar racks with same
dimensions, Width: 150 mm
141A-VC5G
Single Pole Busbar Covers
Snap-on profile for single busbars for protection
against electric shock.
Length: 1 m, can be cut to length.
12…30 x 5
10
141A-BS5
12…30 x 10
141A-BS10
Hat (DIN) Rails — MCS Top Hat Rail (Plastic)
Slides onto mounting modules and is then fixed with
screws.
Has notches for MCS components (prevents
movement of components when used with vertical
busbar).
45
10
141A-AHR45
54
141A-AHR54
63
141A-AHR63
Control Plug
Pull-apart terminal block allows fast and simple
disconnection of control wiring.
Snaps on the support of the mobile device rail.
Composed of plug holder, male and female parts.
8 Pole
1

141A-APC8
10 Pole
141A-APC10
12 Pole
141A-APC12
Control Plug Holder
Suitable for use with 8-, 10-, or 12-pole control plugs.
1
141A-APH
Connection Clip
For joining base of mounting modules.
50
141A-AK
 May be ordered in package quantities of 10. Add letter M to the end of the Cat. No. (Example: 141A-APC8M).
PQ = Package Quantity