User manual
Bulletin 190S
Starters
1-49
Visit our website: www.ab.com/catalogs
Rockwell Automation
POWER
Product Selection
190S Compact Starter with Bulletin 140M Circuit Breaker
and Bulletin 100-C Contactor
Short-Circuit Coordination Type "1" and "2" according to IEC 60947-4-1
Complete unit, ready for connection with internal wiring
Auxiliary Contacts Wired to Terminal Block at Bottom of Starter Assembly
Accessories: Bulletin 140M Circuit Breakers and 100-C Contactors
Removable cover
IEC and UL/CSA compliant
Mounting Versions:
- Screw Fixing
- Snap Fixing on (1) or (2) 35 mm DIN Rails
- Snap Fixing on (1) 75 mm DIN Rail
Standard Motors
AC-3, 3-Phase
Max. Fault Current I
q
400/415V
Motor Current
Setting Range
Magnetic Trip
Current
Direct On-Line
Starters
[kW] Type 2 [kA] [A] [A]
Cat. No.
C-Frame
— 65 0.10…0.16 2.1
190S-AN⊗2-CA16C
0.06 65 0.16…0.25 3.3
190S-AN⊗2-CA25C
0.09 65 0.25…0.40 5.2
190S-AN⊗2-CA40C
0.18 65 0.40…0.63 8.2
190S-AN⊗2-CA63C
0.25 65 0.63…1.0 13
190S-AN⊗2-CB10C
0.55 65 1.0…1.6 21
190S-AN⊗2-CB16C
0.75 65 1.6…2.5 33
190S-AN⊗2-CB25C
1.5 50 2.5…4.0 52
190S-AN⊗2-CB40C
2.2 50 4.0…6.3 82
190S-AN⊗2-CB63C
4 50 6.3…10 130
190S-AN⊗2-CC10C
5.5 50 10…16 208
190S-BN⊗2-CC16C
7.5 50 10…16 208
190S-CN⊗2-CC16C
D-Frame
1.5 65 2.5…4.0 52
190S-AN⊗2-DB40C
2.2 65 4.0…6.3 82
190S-AN⊗2-DB63C
4 65 6.3…10 130
190S-AN⊗2-DC10C
5.5 65 10…16 208
190S-BN⊗2-DC16C
7.5 65 10…16 208
190S-CN⊗2-DC16C
10 65 14.5…20 260
190S-DN⊗2-DC20C
11 65 18…25 325
190S-DN⊗2-DC25C
F-Frame
15 65 23…32 416
190S-EN⊗3-FC32C
18.5 65 32…45 585
190S-FN⊗3-FC45C
22 65 32…45 585
190S-GN⊗3-FC45C
1 N.O. + 1 N.C. auxiliary contacts on 140M are standard. N.O. auxiliary contact on 100-C (1 N.O. + 1 N.C. for F-
Frame types) are standard.
⊗ For AC coil voltage codes, see page 1-31. DC-control voltages and optional configurations on request.
Direct On-Line Starters, Bulletin 190S
Note: Line voltage and short-circuit coordination see MCS Star.
Verify that the circuit breaker can be set to the rated motor current!
Standard Configurations for AC-Control
M
3 ~
I >