User manual

Bulletin 100S-D
Contactors
1-42
Visit our website: www.ab.com/catalogs
Rockwell Automation
POWER
Description For Use With Cat. No.
Interlock — Mechanical Only
 No additional space required
100-D115…100-D420
100-DMA00
Interlock — Dual Electrical/Mechanical
 No additional space required
 Two N.C. auxiliary contacts
100-D115…100-D860
100-DMD02
Interlock — Dual Electrical/Mechanical
 Provides interlocking between Bul. 100-
C and Bul. 100-D contactors
 Two N.C. auxiliary contacts
100-C60…100-C97 between
100-D115…100-D180
100-DMC02
Terminal Lugs
 Set of two
 Protection class IP2X per IEC 60529 and
DIN 40 050
100-D115 100-DTB110
100-D115, 100-D140, 100-D180,
100-D115E…D180E, 193-EC_F,
193-EE_F
100-DTB180
100-D210...100-D420, 193-
EC_G, 193-EF2C, 193-EE_G
100-DTB420
Control Circuit Terminal
2 x 2.5 mm
2
Connects to Cat. Nos. 100-
D115...D180
100-DAT1
Connects to Cat. Nos. 100-
D210...D420
100-DAT2
Phase Barriers
Set of 4
100-D630…D860, 193-EC_H,
193-EE_H
100-DPB860
Description Suppressor Rating For Use With Cat. No.
Suppressor Module for Bul. 100-D
Contactors
• For limiting surge voltage when
coil circuits are interrupted
• Supplied as standard on all
conventional DC coil contactors
and all electronic coil contactors
(as part of the supply module or
delivered with separate suppressor
module)
RC Module (AC
control)
for contactors with
conventional coil
21...48V, 50 Hz;
24...55V, 60 Hz
100-
D115...100-
D180
100-DFSC48
95...110V, 50 Hz;
110...127V, 60 Hz
100-DFSC110
180...277V, 50 Hz;
208...277V, 60 Hz
100-DFSC240
380...550V, 50 Hz;
440...600V, 60 Hz
100-DFSC550
Varistor Module
for contactors with
conventional coil
55V AC
100-
D115...100-
D420
100-DFSV55
56...136V AC 100-DFSV136
137...277V AC 100-DFSV277
278...600V AC 100-DFSV575
208...277V AC 
100-
D115...100-
D420
100-DFSV550
 For overvoltage category IV (IEC 947 for 100-D...-EI) e.g., lightning protection requirements.
Accessories for 100-D, 100S-D, Continued
Accessories