User manual

Bulletin 100-C / 100-CR
Contactors
1-35
Visit our website: www.ab.com/catalogs
Rockwell Automation
POWER
Control Modules (For 100-C09…C97 contactors), continued
Accessories
Description For Use With Cat. No.
Pneumatic Timing Modules
 Pneumatic timing element contacts
switch after the delay time. The
contacts on the main control relay
continue to operate without delay.
On-Delay
0.3…30 s Range
100-C or
700-CF with
AC coils or
DC electronic
coils
100-FPTA30
1.8…180 s Range
100-FPTA180
Off-Delay
0.3…30 s Range
100-C all,
700-CF all
100-FPTB30
1.8…180 s Range
100-FPTB180
Electronic Timing Modules — On-
Delay
Delay of the contactor or control relay
solenoid.
The contactor or control relay is
energized at the end of the delay time.
On-Delay
0.1…3 s Range
100-C or
700-CF with
110…240V,
50/60 Hz or
110…250V
DC coils
100-ETA3
1…30 s Range
100-ETA30
10…180 s Range
100-ETA180
110…240V, 50/60 Hz
110…250V DC
On-Delay
100-C or
700-CF with
24…48V DC
coils
0.1…3 s Range 100-ETAZJ3
1…30 s Range
100-ETAZJ30
10…180 s Range
100-ETAZJ180
24…48V DC
Electronic Timing Modules — Off-
Delay
Delay of the contactor or control relay
solenoid.
After interruption of the control signal,
the contactor or control relay is de-
energized at the end of the delay time.
Off-Delay
100-C or
700-CF with
110…240V
50/60 Hz
coils
0.3…3 s Range 100-ETB3
1…30 s Range
100-ETB30
10…180 s Range
100-ETB180
110…240V,
50/60 Hz
Off-Delay
100-
C09…C37 or
700-CF with
24V 50/60 Hz
coils
0.3…3 s Range 100-ETBKJ3
1…30 s Range
100-ETBKJ30
10…180 s Range
100-ETBKJ180
24V, 50/60 Hz
Electronic Timing Modules
 Delay of the contactor solenoid.
Contactor K 3 (Y) is de-energized
(off) and K 2 (D) is energized (on)
after the end of the set Y end time.
(Switching delay at 50 ms.)
 Continuous adjustment range
 High repeat accuracy
Transition Time Y
Contactor
1…30 s Range
110…240V, 50/60 Hz
100-C with
110…240V,
50/60 Hz
coils
100-ETY30
Electronic Star-Delta Timing Relay
Output Y picks up when the supply
voltage is applied and resets again
after time t. After a fixed changeover
time tu, output relay Δ picks up and
remains energized until the supply
voltage is interrupted.
 22.5 mm width
24…48V DC,
24…240V AC, 50/60 Hz
100-K, 100-
C,
100-D
700-FSY2DU23
 22.5 mm width
346…440V AC, 50/60 Hz
700-FSY2DA40
 17.5 mm width
24…48V DC
24…240V AC. 50/60 Hz
100-K, 100-
C,
100-D
700-FEY2QU23