User manual

Bulletin 100-C / 100-CR
Contactors
1-34
Visit our website: www.ab.com/catalogs
Rockwell Automation
POWER
Accessories
Description For Use With Cat. No. ‡N.O. N.C.
Auxiliary Contact Blocks for Side Mounting
with Sequence Terminal Designations
 1- and 2-pole
 Two-way numbering for right or left mounting
on the contactor
 Quick and easy mounting without tools
 Electronic-compatible contacts down to 17V,
10 mA
 Mirror contact performance to the main
contactor poles
 1L = Late break N.C./early make N.O.
0 1 100-C
100-SB01
1 0 100-C §
100-SB10
0 2 100-C §
100-SB02
1 1 100-C §
100-SB11
2 0 100-C §
100-SB20
1L 1L 100-C §
100-SBL11
 Max. number of auxiliary contacts that may be mounted:
AC coil contactors — max. 4 N.O. contacts on the front of the contactor, 2 N.O. contacts on the side,
4 N.C. front or side, 6 total.
DC coil contactors — max. 4 N.O. contacts on the front of the contactor or max 2 N.O. contacts on the side,
4 N.C. front or side, 4 total.
‡ May be ordered in package quantities of 10. Add letter M to the end of the cat. no. Example: 100-SB01M).
§ Double numbering — Left-side mounting only is recommended for cat. no. 100-C09…100-C23 due to double
numbering.
Control Modules (For 100-C09…C97 contactors)
Description Voltage Range For Use With Cat. No.
Mechanical Interlocks
 For interlocking of two contactors.
 Common interlock for all Bul. 100-C
contactor sizes
 Interlocking of different sizes
possible
 Mechanical and electrical
interlocking possible in one module
by means of integrated auxiliary
contacts
 9 mm dovetail connector included
Mechanical only,
without auxiliary contacts
100-C (except
100-C40, -
C90)
100-MCA00
Mechanical/ electrical
interlock with 2 N.C.
auxiliary contacts
100-MCA02
Mechanical Latch
 Following contactor latching, the
contactor coil is immediately de-
energized (off) by the N.C. auxiliary
contact (65-66).
 Electrical or manual release
 1 N.O. + 1 N.C. auxiliary contacts
 Suitable for all Bul. 100-C contactor
sizes, 9…97 A
Maximum command
duration 0.03…10 s
100-C with AC
or 24V DC
electronic coils
(except 100-
C90)
100-FL11
⊗
⊗ Voltage Suffix Code for Mechanical Latch
The cat. no. as listed is incomplete. Select a voltage suffix code from the table below to complete
the cat. no. Example: 230V, 50/60 Hz: Cat. no. 100-FL11⊗ becomes cat. no. 100-FL11KF.
AC Control AC Control AC Control
Code Description Code Description Code Description
KJ 24V 50/60 Hz KD 110V 50/60 Hz KN 400V 50/60 Hz
KY 48V 50/60 Hz KF 230V 50/60 Hz
For other AC voltages visit our website or consult your local sales office.
Auxiliary Contacts (For 100-C09…C97 contactors) 