User manual

Bulletin 140M
Motor Protection Circuit Breakers
1-16
Visit our website: www.ab.com/catalogs
Rockwell Automation
POWER
Accessories 140M
Accessories
Description For Use With Cat. No.
IP65 Non-Metallic Enclosure
 Knockouts for M20 and M25
fittings
 Suitable for flexible cable with
internal ground wire or conduit
when externally grounded around
the outside of the enclosure (no
UL/CSA approval)
Black
Handle
140M-C
198E-AYTG2
Red/Yellow
Handle
140M-C
198E-AYTJ2
Screw Adapter
 For screw arrangement of a motor protection
circuit breaker
 Package quantity = 10
140M-C, D, F;
140U-D
140M-C-N45
ECO Connecting Module — 12 A
 For DOL and reversing starters
 Eco-starters mount on single DIN Rail (140M on
DIN Rail)
 Electrical and mechanical interconnection of
140M and 100-K contactors
140M-C to 100-K

140M-C-PEK12
ECO Connecting Modules — 25 A
 Eco-starters mount on single DIN Rail (140M on
DIN Rail)
 Electrical and mechanical interconnection of
140M MPCB and 100-C (with AC coils or 24V
DC electronic coils) contactors
140M-C to 100-
C09…C23
‡
140M-C-PEC23
140M-D to 100-
C09…C23
‡
140M-D-PEC23
ECO Connecting Modules — 25 A
 Eco-starters mount on single DIN Rail (100-C on
DIN Rail)
 Electrical and mechanical interconnection of
140M MPCB and 100-C (with AC or DC coils)
140M-C, 140M-D
to 100-C09…C23
‡
140M-C-PEC23A
Connecting Modules — 25 and 45 A
 Contactor and MPCB MUST BE mounted
separately on (2) DIN Rails
 Electrical interconnection of 140M and 100-C
(with AC coils)
140M-C to 100-
C09…C23
140M-C-PNC23
140M-D to 100-
C09…C23
140M-D-PNC23
140M-D to 100-
C30…C37
140M-D-PNC37
140M-F to 100-
C30…C37
140M-F-PNC37
140M-F to 100-
C43
140M-F-PNC43
Flexible Connecting Module — 22 A (25 A)
 Flexible electrical interconnection
 Allows variable spacing between 140M MPCB
and 100-C contactor (with AC or DC coils:
105…145 mm DIN Rail spacing with AC coils,
105…125 mm with DC coils)
140M-C, 140M-D
to 100-C09…C43
§
140M-D-PFC23DM
Coil Modules — 25 A and 45 A
 For use with Bulletin 103T/107T 3-component
starters
140M-C, -D to
100-C09…C23
140M-C-PSC23
140M-D, -F to
100-C30…C43
140M-F-PSC43
 May be ordered in package quantities of 10. Add letter M to the end of the cat. no. (Example: 140M-C-PEK12M).
‡ May be ordered in package quantities of 20. Add letter M to the end of the cat. no. (Example: 140M-C-PEC23M).
§ 140M-C / 140-D to 100-C30…C43 allowable I
th
= 25 A for IEC applications.