User manual

Bulletin 800FC — Configured Pendant Stations
Product Selection
Enclosure Type Description Cat. No.
3-hole
Pendants — Yellow
Plastic IP66 
‡
800FC-3Z
5-hole §
800FC-5Z
7-hole §
800FC-7Z
9-hole §
800FC-9Z
 Housings supplied with cabel sleeve, hanger ring, cable clamp, wire guides, and gasket.
‡ Operator in position 1 is mounted horizontally. Operators in positions 2 and 3 are mounted vertically.
§ All operators are mounted horizontally.
1-, 2-, and 3-Speed Operators
800FP –
C
A 1 U243
ab c
a
Operator Type
Code Description Code Description
A 1-speed single arrow B 2-speed
D 1-speed double arrow C 3-speed ‡
b
Cap Color
Code Description
1 White
2 Black
c
Symbol
Valid with
Table a
Selections:
Description
Code
Vertical Mounting
Code
Horizontal Mounting
Black White Black White
A, B, C U100 Blank Blank U100 Blank Blank
One-Speed Operators
A
U241 DOWN UP U243 RIGHT LEFT
U244 REVERSE FORWARD U246 FORWARD REVERSE
U700 LEFT RIGHT U700 UP DOWN
D
U261 DOWN FAST UP FAST U263 RIGHT FAST LEFT FAST
U264 REVERSE FAST FORWARD FAST U266 FORWARD FAST REVERSE FAST
U260 LEFT FAST RIGHT FAST U260 UP FAST DOWN FAST
Two-Speed Operators
B
U271 2-speed DOWN 2-speed UP U273 2-speed RIGHT 2-speed LEFT
U274 2-speed REVERSE 2-speed FORWARD U276 2-speed FORWARD 2-speed REVERSE
U270 2-speed LEFT 2-speed RIGHT U270 2-speed UP 2-speed DOWN
Three-Speed Operators
C
U291 3-speed DOWN 3-speed UP U293 3-speed RIGHT 3-speed LEFT
U294 3-speed REVERSE 3-speed FORWARD U296 3-speed FORWARD 3-speed REVERSE
U290 3-speed LEFT 3-speed RIGHT U290 3-speed UP 3-speed DOWN
Cat. No. 800FC-3Z Cat. No. 800FC-7Z
Note: Please see page 3-32 for proper contact block configurations.
 Text (DOWN, UP, LEFT, etc.) indicates arrow direction. Text is not printed on operators.
‡ Proper contact block assembly of these devices is required. Please see contact block information on page 3-32.
OPERATOR INTERFACE
Rockwell Automation
Visit our website: www.ab.com/catalogs
3-31
Bulletin 800FC
Control and Indicating Units