User manual

Device Selection
Product Line Overview
LOGIC
Rockwell Automation
Visit our website: www.ab.com/catalogs
2-34
Bulletin 1492-RCD, 1492-SP, 1492-FB, 1489, 140F
Circuit Protection
Bulletin 1492-RCD 1492-SP
Type Residual Current Device Miniature Circuit Breaker
Features
 True IP2X finger-safe design (front)
 For applications in which AC and
pulsating DC fault currents are likely to
appear, nonselective and non-delayed
 Designed to prevent unwanted tripping
caused by switching electronic circuit
devices
 Auxiliary and Signal contacts may be
added
 True IP2X finger-safe design (front)
 Energy Limiting Design protects
downstream components better than
conventional breakers during short
circuits
 Field mountable options for selective
applications
 AC and DC voltage ratings in one
convenient device
 Superior shock and vibration resistance
capabilities
 Mounts on hut (DIN) rail
Number of Poles
2 pole (1 + N)
4 pole (3 + N)
1, 2, 3 pole
1 pole + neutral, 3 pole + neutral
Rated voltage 230V AC (1+N), 400V AC (3+N) 230/400V AC, 240/415V AC
Tripping characteristic
reference temperature
— 30 °C
Rated tripping current 30, 100, 300, 500 mA —
Sensitivity AC and pulsating DC —
Rated short circuit
capability
10 kA with 63 A gG/gL back-up fuse
for up to 63 A
10 kA with 80 A gG/gL back-up fuse
for 80 A
10 kA
Max. back-up fuse for
short circuit protection
63 A gG/gL for up to 63 A
80 A gG/gL for 80 A
100 A gG/gL
Maximum back-up fuse
for overload protection
25 A gG/gL (25 A and 40 A devices)
40 A gG/gL (63 A devices)
50 A gG/gL (80 A devices)
—
Degree of protection IP20 IP20
Mechanical life
≥10000 changeovers ≥6000 changeovers
Mounting 35 mm hut (DIN) rail 35 mm hut (DIN) rail
Operating temperature -5°C…+40°C
-5°C…+40°C
(reduction factors are required
for higher temperatures )
Wire size 1.5…35 mm
2
1…25 mm
2
Terminal torque
2.4 N.m ≤40 A, 3.0 N.m ≥63 A
2.4 N.m
Standards and
Approvals
IEC/EN 61008
VDE, CE
IEC/EN 60889
CE, VDE, UL 1077, CSA 22.2 No. 235
Product Selection See page 2-37 See page 2-38