Owner`s manual

81
PLUMBING & BATH FEATURES
FRESHWATER SYSTEM
MONITOR PANEL
KITCHEN SINK
e monitor panel (Figure
13-1) permits checking the
approximate levels in the
fresh, gray, and black water
holding tanks; the LP-gas
level; and the condition of
the battery.
e monitor panel is gener-
ally located above the refrig-
erator. To use this monitor,
simply press the “level test”
button to read the fresh,
gray, and black water tanks
and the present condition of the batteries.
e “empty” indicator light will momentarily light when the button is pressed. If the tank is full, all of
the lights will be “on.” Lights are sequentially arranged to indicate uid levels in approximately third-
tank increments. For example: if the tank selected is approximately two-thirds full, then the indicator
lights “E” (for “empty”), “1/3”, and “2/3” will be lit.
e kitchen sink (Figure 13-2) installed is a dou-
ble-bowl sink equipped with a sink cover to provide
additional counter space when the sink is not in use.
For the sink, cleaning care consists of washing only
with mild detergents and water and using a so
cloth for subsequent drying and polishing.
Figure 13-1: Monitor panel
Figure 13-2:
Kitchen sink