User's Manual

3. Getting started with BIONOVA X

3.1. Unpacking and installation

1. Carefully open the crate and remove the printer from the packaging by grasping the printer firmly

from the bottom with two people.

2. Set the printer on a leveled and steady table or biosafety cabinet surface.

3. Use the power cord to connect the printer to a power supply via the port located on the left side of

the printer.

4. Power on the printer by pushing the power supply switch located on the side of the printer.

5. Power on the computer by pushing the power button located in the front of the printer.

3.2. Contents of the box

 1x BIONOVA X 3 D printer

 1x Power cord

 1x User manual

(Optional) Consumables box containing:

 1x Stemink

PEGDA [Poly(ethylene glycol) diacrylate] Sterile Starter Bioink, 50ml

 2x Probes for 6-Well Plate

 2x Probes for 12-Well Plate

 2x Probes for 24-Well Plate

 3x 6-Well Plates

 3x 12-Well Plates

 3x 24-Well Plates