User's Manual

2
1. Safety and compliance
Before you start using your BIONOVA X Model NOVAX-1001, please carefully review the entire manual.
Improper operations of the bioprinter can lead to serious personal injury and equipment damage.
1.1 General safety information
Keep your workplace tidy. Do not operate the BIONOVA X Model NOVAX-1001 in the presence of
flammable liquids, gases, or dust. The BIONOVA X Model NOVAX-1001 should be operated by the
trained personnel, who are aware of the risks and dangers that can be induced to themselves and the
staff in close proximity to the bioprinter. The staff involved in the installation or maintenance of the
system, or a part of the system, must be qualified through appropriate training. Use the instrument only
for its intended purpose as described in the documentation. Do not modify the instrument, sub-
components, or accessories.
WARNING!
● Please do not refit the BIONOVA X Model NOVAX-1001 plug.
● Please do not use the BIONOVA X Model NOVAX-1001 in damp or wet locations.
● Please unplug the BIONOVA X Model 3 D printer if you do not intend to use it for a long period
of time to prevent uncertain accidents.
● Never reach into the bioprinter while it is in operation. BIONOVA X Model 3 D printer has many
different moving parts that can cause serious personal injuries.
● Do not leave the printer unattended while it is in operation.
● Always wear protective gear including gloves and eye protection when using the printer or
handling hazardous materials.
● Before cleaning, inspecting, adjusting, repairing, or disassembling the instrument or the
dispensing units, stop the instrument, turn off the main switch, and disconnect it from its
electrical power source.
● Verify that all connections are properly connected and all components are properly mounted or
installed before using the bioprinter.
● Only use consumables that are designed for and compatible with the BIONOVA X Model NOVAX-
1001.